Marbella VR4 - System Settings

33
© 2016 Ma k a T e c hnologie s G roup . A ll Righ ts Re s er v ed .
Getting Started
Operation of your VR4 F HD Digital Roadcorder
TM
Frequency
Please set accordingly to the local power supply respectively; 50Hz or 60Hz.
1 Press on MENU twice to enter System Setting
2 Press on UP or DOWN button to navigate to the function that shows
FREQUENCY.
3 Press on OK to enter and show : 50Hz/ 60Hz
4 Press on the UP or DOWN button to make your selection
5 Press on OK to confirm your entry and exit selection
6 Press on MENU once exit Setting
Default Setting
Set the system parameters to the default value.
1 Press on MENU twice to enter into System Setting
2 Press on UP or DOWN button to navigate to the function that
shows DEFAULT SETTING
3 Press on OK
4 Press on the UP or DOWN button to make your selection
5 Press on OK to confirm your entry and exit selection
6 Press on MENU once to exit Setting