EasyManua.ls Logo

Marco ECOBOILER T2 - User Manual

Marco ECOBOILER T2
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTIONS FOR MODELS
ECOBOILER T2
(P/N: 1000672 and 1000672#)
ECOBOILER T5
(P/N: 1000660 and 1000660#)
ECOBOILER T10
(P/N: 1000661 and 1000661#)
ECOBOILER PB5
(P/N: 1000665 and 1000665#)
ECOBOILER PB10
(P/N: 1000666 and 1000666#)
(Where # is a suffix of one or more letters except US models )
Page 2. Instruction for use in English
Page 5. Instruction for use in French
Page 9. Instruction for use in German
Page 13. Instruction for use in Russian
Permissible mains inlet water pressure:
Minimum 100kPa / 0.1MPa / 1bar / 14.5psi
Maximum 1000kPa / 1MPa / 10bar / 145psi
Marco Beverage Systems Limited.
63d Heather Road,
Sandyford Industrial Estate,
Dublin 18.
Marco Beverage Systems Limited.
Shire House, Strixton Manor,
Strixton, Wellingborough, Northants,
NN29 7PA
Ireland Tel: 00353 (0) 1 295 2674
Ireland Fax: 00353 (0) 1 295 3715
UK Tel: 0044 (0) 1933 666 488
UK Fax: 0044 (0) 1933 666 968
www.marcobeveragesystems.com email: sales@marcobeveragesystems.com

Questions and Answers

  • R
    robinjohnsonAug 10, 2025
    What to do if my Marco Boiler is not filling?
    • J
      Jessica HayesAug 10, 2025
      If your Marco Boiler isn't filling, first check the water pressure. If the water pressure is adequate, it's recommended to contact a service agent for further assistance.
  • M
    Monica ConradAug 25, 2025
    What to do if the water level is below elements in Marco Boiler?
    • T
      Thomas MahoneyAug 25, 2025
      If the water level in your Marco Boiler is below the heating elements, check the water pressure. If the pressure is fine, contact a service agent.

Marco ECOBOILER T2 Specifications

General IconGeneral
ModelECOBOILER T2
Power SupplyElectric
Heating Power2.8 kW
Power2.8 kW
Voltage230 V
MaterialStainless Steel
ProtectionIPX4
Output per hour28 liters
Frequency50 Hz

Related product manuals