Marco Ecoboiler T5 - Page 5

Instruction Booklet 1000660(MJ) T5 1000661(MJ) T10 1000665(MJ) PB5 1000666(MJ) PB10 Ecoboiler
220312
Assembly
To re-attach the front panels, complete the removal actions in steps 5 & 6 in reverse order. Ensure
that the panel clips are securely fastened.
1. Disconnect the machine
from the electrical supply.
2. Allow to cool sufficiently.
3. The metal upper and lower
front panels are clipped to
the main body.
4. Insert flat headed
screwdriver at the four
locations indicated on the
picture and rotate to
seperate the panels.
Note:- There is no need to
‘lever’ the screwdriver - a
small rotation is all that is
required.
c
a
b
d
5. To remove the upper
front panel, rotate the
top of the panel
forward and lift.
6. To remove the lower
front panel, rotate the
bottom of the panel
forwards and slide
downwards.