When the heart rate data is empty, it displays “000Bpm”. Go to the heart rate icon, long press the
touch key for more than 2 seconds to start the test. The data is displayed on the watch after the
test. It is measured for 30 seconds and the watch only keeps the last data. If you exit from the
this function during the test, the data will not be recorded.
3.5 Training
3.5.1 Training mode includes: Walking, Running, Cycling, Skipping, Badminton, Basketball,
Football.
3.5.2 Switch to the corresponding training icon: Long press to enter the corresponding
exercise mode. It will show data such as steps, distance, calories, heart rate and exercise duration.
Long press to pause and exit.
3.5.3 Activity data can only be viewed on the APP, not on the watch.
Note: Sport data saving rules:
1. The exercise time must be more than 2 minutes
2. Includes testing heart rate data
It needs to meet any of the two conditions so the data can be saved. If not, the app will not keep
any exercise data.
3.6 Blood Pressure
Go to the blood pressure icon and long press the touch key to start the test. You can stop
pressing after the data is obtained.
3.7 Blood Oxygen
Go to the blood oxygen icon and long press the touch key to start the test. You can stop
pressing after the data is obtained.
3.8 Weather
After the weather function is enabled on the APP, it will be displayed on the watch. It won’t
display if it’s OFF on the APP. The weather information will be updated once every 2 hours.
3.9 Message
Go to the message interface and long press to view the saved messages. In order to do this,
you must first turn ON the function in the application and allow time to synchronize with the
smart watch. The last 5 messages will be saved. Long press the current message to delete it.
To Next Page
Loading...
