Messages received on the phone can be displayed on the smart watch, but cannot be
answered from the watch. For incoming calls, they are displayed on the smart watch but
cannot be heard or answered on the watch.
3.10 Shutter
You can take a photo with your phone camera by remote control.
For Android users: Click "Shutter", your phone turn on the phone's camera, the camera icon
will appear on the watch. Press and hold the touch area of the smart watch to take a photo.
For iPhone users: Click the “Shutter”, on your phone you must manually enter the camera
interface and then click to take photos from the smart watch.
3.11 Player
Long press to enter the music control interface. Long press to pause or play the previous song
or the next song. Short press to switch the current operation. It is recommended that the
phone music player runs on the foreground. If not, some smart phones probably will have
compatibility problems.
3.12 Others
Long press to enter the other functions:
3.12.1 Back: Long press to return to the previous interface.
3.12.2 Stopwatch: Long press to start timing, short press to pause timing, long press to clear
and exit timing.
3.12.3 Mute: Long press to switch on and off.
3.12.4 Brightness: Long press to enter the brightness interface, short press to set the
brightness level, long press to confirm setting.
3.12.5 Reset: Long press to restore factory settings, the watch will return to the factory state.
3.12.6 Power off: Long press to turn off the watch.
4. Precautions
4.1 Only one smart watch pairing application should be installed on the phone to ensure that the
connection with the smart watch is normal. If several applications are connected, they can affect
the connection between the watch and the phone.
To Next Page
Loading...
