Mares Nemo - Set Free - Surface Time; Set Free - Al Depth

EN
48
Set Free - Surface Time
This alarm monitors the surface time. If enabled, Nemo
sounds an audible alarm when the surface time reaches
the programmed limit; the Surf Time indication on the
display will start to blink.
Set Free - Al Depth
This alarm signals the depth intervals. If enabled, Nemo
issues an audible signal each time the current depth is a
whole number multiple of the programmed increment.
e.g. If the depth interval is 5 m, Nemo will sound at 5 m,
10 m, 15 m, 20 m, ... , at 15 m, at 10 m and at 5 m.
Note:
Carefully read the Log Book chapter of this manual.
WARNING
It is recommended to always to begin
the dive with Nemo set to Predive
mode.
This ensures correct functioning even
if the wet contacts are dirty with salt,
oil, sunscreen etc...
In any case, as you begin your dive
always check that the computer has
effectively activated.