Mares Puck - User Manual

Manuale d’istruzioni • User’s Guide • Bedienungsanleitung • Manuel d’utilisation
Manual de instrucciones • Manual de instruções • Gebruikershandleiding • Användarinstruktioner
Οδηγίες χρήσης • Käyttäjän Opas • Instrukcja użytkowania • Felhasználói útmutató
cod. 44200657 - printed by Me.ca - 17.000 - 06/07 - ArtBooK 3017/07
Mares S.p.A. - Salita Bonsen, 4 - 16035 RAPALLO - ITALY - Tel. +39 01852011 - Fax +39 0185669984
www.mares.com
Puck
Dive Computer Puck

Summary

Important Safety Warnings

Warning Symbols Explained

Explains the meaning of CAUTION, DANGER, and WARNING symbols used in the manual.

Responsible Diving Practices

Puck Dive Computer Quick Guide

How the Puck Dive Computer Works

Checking Battery Power Level

Setting Puck Dive Computer Parameters

Watch and Display Settings

Details how to adjust time, date, contrast, and key beep settings.

General Dive Data Configuration

Covers setting water type, units of measure, and clearing residual nitrogen.

Dive Mode and Parameter Adjustment

Explains selecting dive modes (AIR, EAN, Bottom Time) and setting related parameters.

Time Mode Functionality

Diving with Puck

Pre-Dive Mode Operations

Displays dive details before descending below 1.2m (4ft) for AIR and EAN modes.

Air Dive Modes

Details "No-Decompression" and "Decompression Stop" dive states for AIR.

Time to Surface Calculation

Decompression Stop Management

Deep Stop Guidance

Ascent Rate Control

Safety Stop Procedure

Surfacing and Surface Mode

Surfacing - Air

Details how the computer behaves when the diver surfaces after an AIR dive.

Surface Mode - Air

Shows desaturation time, NO FLY icon, and error icons after surfacing.

Enhanced Dive Modes: EAN

Pre-Dive and No-Decompression EAN Dives

Covers PREDIVE-EAN and DIVE-EAN "No-Decompression" modes and displays.

EAN Decompression Stop Dives

Details the DIVE-EAN "Decompression Stop" mode and associated data displays.

Bottom Time (Gauge) Mode

Bottom Time Mode Operations

Surface Mode - Bottom Time

Displays desaturation time and no-fly delay for Bottom Time mode.

Bottom Time with Behavior Error

Explains how errors affect BT mode operation and displays.

Logbook Functionality

Logbook Dive Details

Displays dive type, number, and date/time for each logged dive.

Logbook Technical Data

Shows summary details like max depth, ascent rate, and dive parameters.

Planning and System Functions

Planning No-Decompression Limits

Allows scrolling through no-decompression limits based on previous dive data.

System Information and Battery Check

Accesses serial number, firmware, and battery charge level.

Frequently Asked Questions (FAQ)

Maintenance and Battery Replacement

Routine Maintenance

Recommends rinsing with fresh water and avoiding chemical products.

Replacing the Battery

Provides instructions and warnings for replacing the PUCK's battery.

Technical and Functional Characteristics

Technical Features

Lists specifications like depth measurement, temperature range, and accuracy.

Functional Characteristics

Details dive modes, logbook storage, backlighting, and audible alarms.

Warranty and Product Information

Warranty Terms and Exclusions

Outlines the two-year warranty, limitations, and exclusions.

Finding the Product Code

Instructs how to view the product code and serial number in SYSTEM mode.

Disposal of the Device

Advises on proper electronic waste disposal of the device.

Mares Puck Specifications

General

Display Type	LCD
Operating Modes	Air, Nitrox
Backlight	Yes
Ascent Rate Indicator	Yes
Single Button Operation	Yes
Altitude Adjustment	Yes
Max Operating Depth	150 meters
Battery Type	CR2450
Interface	No
Nitrox Compatibility	Yes, up to 50%
Algorithm	Mares-Wienke RGBM