Need help?Do you have a question about the Mares Smart Apnea and is the answer not in the manual?
Explains the two primary modes: watch mode and dive mode (pre-dive, dive, surfacing).
Details battery type (CR2430) and how the display indicates battery status.
Instructions for connecting the device to a computer for data transfer.
Describes the functions of the two buttons (UP/ENTER, DOWN/ESC) in surface and dive modes.
Describes the stopwatch function.
Explains how to use the countdown timer feature.
Explains how to activate the ready-to-dive mode.
Introduces the menu for changing settings related to dive and time parameters.
Introduces the menu for accessing recorded dive history.
Introduces the menu for downloading dive data to a PC or Mac.
Introduces the menu for viewing hardware and software information.
Allows setting dive-specific parameters like alarms.
Allows setting time and date parameters, including wake-up alarm.
Guide to using the Smart Apnea during a free dive session.
Explains how the device behaves when returning to the surface.
Details how dive data is logged and accessed in free dive mode.
Lists specifications like depth, temperature, resolution, and memory.
Provides general maintenance advice, including rinsing and avoiding certain conditions.
Detailed instructions and warnings for replacing the device battery.
Lists conditions that void the warranty, such as improper use or damage.
Instructions on locating the serial number via the INFO submenu.
General| Strap Material | Rubber |
|---|---|
| Stopwatch | Yes |
| Plan Mode | No |
| Nitrox Compatibility | No |
| Fresh and Salt Water Settings | Yes |
| Residual Nitrogen Reset | No |
| Ascent Rate Indicator | Yes |
| Type | Freediving Computer |
| Depth Rating | 150 meters |
| Max Displayed Depth | 150 m / 492 ft |
| Modes | Apnea |
| Depth Range | 0-150 m / 0-492 ft |
| Display Type | Segmented LCD |
To Next Page