Do you have a question about the Mares Nemo and is the answer not in the manual?
Default operating mode displaying current time.
Stopwatch timer function for timing events.
Access to set 'land' functions like time and alarm.
Conserves battery power when the instrument is not in use.
Set the time, its format (12/24 hour), and date.
Set and turn on/off the alarm, enable second time zone.
Select temperature units and enable time signal.
Configure water type, units, and clear residual nitrogen memory.
Select dive type (Air, Nitrox, Free) and set parameters.
Alarm condition for PPO2 exceeding the maximum limit.
Monitors oxygen toxicity exposure using CNS percentage.
Check NDLs considering dive history and selected parameters.
Set programmable parameters like alarms, time, and depth for freediving.
Transfer data from Nemo to a personal computer.
Common issues and their solutions.
Locate and record the instrument's serial number.
| Display Type | LCD |
|---|---|
| Battery Type | CR2450 |
| Ascent Rate Indicator | Yes |
| Backlight | Yes |
| Operating Modes | Air, Nitrox |
| Glass | Mineral |
| Nitrox | Yes, up to 50% |