EN
Dive - Air
In Dive Mode, the buttons have different functions:
<+> button:
• temporarily replaces the current depth reading with
the maximum depth (for 5 seconds, after which the
display reverts to showing the current depth);
• holding down the button for 2 seconds activates the
display backlight.
<-> button:
• is used for changing the information shown on the
display bar.
<enter> button:
• temporarily displays (for 5 seconds) the dive
parameter settings, just as they appear in Predive
Mode.
<esc> button:
• this button is disabled during the dive.
Note:
When the no decompression time
remaining is one minute, an audible
alarm is sounded to indicate that the
diver is about to exceed the no-
decompression limits.
WARNING
Continual use of the backlight drastically
reduces the battery life.
30
To Next Page
Loading...
