EN
Dive - Air
"NO-DECOMPRESSION" DIVE
When the diver descends below 1.2 meters (4 feet) Nemo
automatically switches to Dive mode and begins
displaying the dive data.
If this mode persists for more than 20 seconds, Nemo
begins recording the dive details in the Log Book memory.
The following data is displayed:
• current depth (in "m" or "ft");
• no decompression time remaining, expressed in
minutes;
•
"No deco" icon;
• duration of the dive in minutes, shown in analog form
around the perimeter of the dial;
• icons for the altitude program and personal correction
factor (if enabled).
On the display bar it is possible to view one of the
following:
• the temperature (in °C or in °F),
• duration of the dive so far (dive time) in digits.
Or
• the temperature (in °C or in °F),
• the primary time.
29
dive menu
To Next Page
Loading...
