Dive -Air
"DECOMPRESSION STOP" DIVE
If the diver does not ascend when the above alarm is
sounded, Nemo begins calculating a "decompression
stop" dive, indicated by the appearance of the "deco"
message and by an audible alarm. The data displayed in
this mode are the following:
• "deco" icon;
• current depth (in "m" or "ft");
• depth of deepest decompression stop (in "m" or "ft");
• duration of the deepest decompression stop;
• duration of the dive in minutes, shown graphically
along the perimeter of the dial;
• icons for the altitude program and personal
correction factor (if enabled).
On the display bar it is possible to view one of the
following
• the ascent time, i.e. the total time necessary for surfacing.
• the temperature (in °C or in °F).
Or
• the ascent time,
• the duration of the dive so far (dive time) in digits
Or
• the ascent time,
• the primary time.
The buttons have the same functions described in the
preceding section on "No-decompression diving".
31
EN