Mares Nemo - Set Time; Adjust Time, Date, and Format; Configure Alarm and Second Time; Set Temperature and Beep Signal

9
Set time
Set Time is used for setting all the information which
appears on the instrument in Time Mode.
Set Time comprises:
Adj Time: set the time, its format (12 or 24 hour),
and date.
Alarm: set and turn on/off the alarm.
2nd Time: enable and set a second time zone.
Temp: select the units of measurement.
Beep: enable time signal.
As described in the chapter "Shortcut to Set Time
Functions", to provide quicker access to the settings the
Set Time function can be invoked directly from Time
Mode.
time menu
EN