Mares Nemo - Set Dive; Set dive - Data; Set dive - Mode

19
Set Dive
SET DIVE mode is used for programming the following
parameters:
Set dive - Data
meters - Celsius / feet - Fahrenheit
salt / freshwater
Clear residual nitrogen
Set dive - Mode
Air
Altitude
Personal correction factor
Uncontrolled ascent
Audible alarms
Nitrox
Percentage O2
Maximum PPO2
Altitude
Personal correction factor
Uncontrolled ascent
Audible alarms
Freediving
Audible alarm for maximum dive time
Setting the maximum dive time
Audible alarm for maximum dive depth
Setting the maximum dive depth
Audible signal for surface interval
Setting the surface interval
Audible signal for depth intervals
Setting the depth intervals
WARNING
Before diving, make sure you have read
and understood all parts of this
manual.
EN
dive menu