41
Surfacing - Nitrox
When the measured depth is less than 1 m (3 ft), Nemo
considers the dive to be suspended ("Surfacing") and
halts the dive timer. If the diver does not return below
1.5 m (5 ft) within the next 3 minutes, Nemo considers
the dive to be finished and records its data in the Log
Book memory. If the diver does re-descend within 3
minutes, the dive continues and the dive timer resumes
from where it left off.
Data displayed in Surface mode:
• duration of the dive;
• maximum depth;
• any icons for underwater behavior errors (omitted
stop, uncontrolled ascent).
Surface Mode - Nitrox
The data displayed in Surface - Nitrox mode is the same
as that for Surface - Air mode, except for the addition
of the %CNS value.
WARNING
Do not fly or travel to high altitudes
while the no-fly indication remains
active.
Note:
If you have completed a Nitrox dive
and wish to do a repetitive dive with
air, set the computer for "Nitrox" with
O
2 at 21%. By so doing, the calculation
of the %CNS will remain active.
EN
To Next Page
Loading...
