Series TT03 Digital Torque Gauges User’s Guide
This section is used to configure the initial mode upon powering on the gauge. To access this parameter,
select Initial Mode from the menu. The screen will display the available modes. An example is as follows:
The default value is Real Time.
11.6 Restore Default Settings
Default factory settings can be restored by selecting Restore Defaults from the menu. The settings may
be found in the Specifications section. The screen appears as follows:
11.7 Information / Welcome Screen
The following screen is displayed at power up and can be accessed at any time by selecting Information
from the menu:
* Real Time
Peak Clockwise
Peak Counter-clockwise
SETTINGS?
No
Yes
Series TT03
Model No: MTT03-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.
To Next Page
Loading...
