DESKTOP PRINTER QUICK START GUIDE
4
USER NOTES
MATERIAL NOMENCLATURE
In this guide, “Onyx” refers to Onyx and Onyx FR; “Nylon” refers to Tough Nylon and Nylon White.
TABLETOP USE ONLY
Markforged Desktop Series printers are approved for tabletop use only. Set up your printer on a sturdy level
POWER DISCONNECT ACCESS
Take care to set up your Desktop Series printer so that the disconnecting device (power switch on the rear face
of the printer) is accessible at all times. Note that the power cord can be disconnected as a backup if the power
switch becomes inoperable or inaccessible.
fog or scratch the surface. Please follow instructions below (Reducing Burn Risks) when cleaning your printer.
REDUCING BURN RISKS
● Do not touch the nozzles and print head when hot, unless explicitly instructed to do so by Markforged
documentation or personnel
● During a print run, leave all doors closed
ALWAYS FOLLOW SAFETY INSTRUCTIONS
operating conditions. Follow all safety instructions posted on the unit and in the written documentation.
Note: Consult the included Safety Sheet for an explanation of the safety icons used in this manual.
NOTE ON FIBER CAPABILITY
This Quick Start Guide covers all models of Markforged Desktop Series printers. If your printer model is not
Quick Start Guide may not apply. Such sections are indicated by the
Markforged logo icon at left.
To Next Page
Loading...
