Need help?Do you have a question about the Markforged FX20 and is the answer not in the manual?
Safety guidelines for operating the FX20, including lockout/tagout procedures to ensure the printer is powered off.
Provides an estimated timeline for installation, detailing tasks and their expected duration, including user and customer training.
Guidelines for assessing and handling customer facilities that do not meet specified requirements, advising contact with support.
Details essential equipment required from the installer or customer, such as digital calipers and specific levels.
Explains how to interpret the digital level's measurements for both X and Y axes and how to switch between them.
Details how to navigate between the digital level's normal, absolute (ABS), and alternate zero (ALT) modes.
Steps to prepare the printer for leveling, including removing shipping boxes and powering down the unit.
Instructions for removing side and rear panels to access internal components necessary for the leveling procedure.
Instructions on lowering the printer's leveling pads to allow casters to spin freely, preparing for chassis leveling.
Guides the process of adjusting the printer's feet to achieve a level chassis relative to the earth using a digital level.
Adjusts encoder gaps on the Y-axis for proper sensor-strip spacing and collision prevention.
Walks through initial configuration stages like network, updates, time zone, gantry skew, and offset calibration upon first startup.
Tests and adjusts build chamber temperature settings for optimal print quality, especially for high-temp materials.
A detailed procedure for manually squaring the printer's gantry, used when automatic compensation fails, with safety warnings.
Fields to record specific measurements obtained from the Gantry Skew Utility for official installation sign-off.
Fields designated for recording various printer leveling measurements, crucial for the installation sign-off process.
Instructions for resellers on completing, signing, scanning, and emailing the sign-off form and associated documentation.
General| Brand | Markforged |
|---|---|
| Model | FX20 |
| Category | 3D Printers |
| Language | English |
To Next Page
