Markforged FX20 - REQUIRED PARTNER TOOLS; ADDITIONAL EQUIPMENT

7
FX20 INSTALL GUIDE
VERSION 1.6 | APRIL 26, 2024
REQUIRED PARTNER TOOLS
Before beginning the installation, conrm you have the following tools. Items in boldface are required.
ADDITIONAL EQUIPMENT
Ѧ 1x digital calipers
Ѧ 1x two-axis digital level**
Ѧ AA batteries (not included with level)
Ѧ 1x Step stool
Ѧ 1x Hex key bit set – metric (in accessory kit)
Ѧ 1x pair of nitrile gloves
Ѧ 1x pair of ush cutters
Ѧ Assorted screwdrivers
Ѧ Lid safety override
Ѧ 1x torque wrench (70 in-lb)
Ѧ 1x set of long handle hex drivers (or a singular long handle 4mm hex driver)
Ѧ 1x Box knife
Ѧ 1x Extension cord
Ѧ 1x Work light
Ѧ 1x Spare power cord
** Two-axis level is a Digi-Pas DWL1500XY, available from the Markforged shop (P/N 21315) or through an
online distributor.