Markforged FX20 - ACCESSORY KIT CONTENTS

FX20 INSTALL GUIDE
6 VERSION 1.6 | APRIL 26, 2024
ACCESSORY KIT CONTENTS
Before beginning the installation, conrm your FX20 Accessory Box includes the following:
FX20 ACCESSORY BOX
Ѧ 1x dust pan and brush set
Ѧ 1x pair of large kevlar gloves (white)
Ѧ 1x FX20 Safety Booklet
Ѧ 1x pair of heat-protection kevlar sleeves
Ѧ 1x ceramic scraper
Ѧ 1x FX20 print sheet
Ѧ 1x digital scale
Ѧ 1x FX20 Accessory Bag (see below)
FX20 ACCESSORY BAG
Ѧ 1x pair of ush wire cutters (5in)
Ѧ 1x 2mm hex driver
Ѧ 1x 2.5mm hex driver
Ѧ 1x 3mm hex driver
Ѧ 1x 4mm hex driver
Ѧ 1x 5mm hex driver
Ѧ 1x ber nozzle torque driver with 10mm bit
Ѧ 1x USB extension cable (3ft)
Ѧ 1x USB A to B cable (3ft)
Ѧ 1x 19mm combination wrench
Ѧ 1x pair of long nose pliers
Ѧ 1x tube of high temp print bed adhesive
Ѧ 1x pack of non-scratch sponges
Ѧ 1x stainless steel pick set
Ѧ 1x torque driver (5 in-lb)
Ѧ 1x 2.5mm torque driver blade
Ѧ 1x build chamber bulb pack (2x halogen build chamber bulbs)
Ѧ 2x plastic nozzles
Ѧ 2x ber nozzles
Ѧ 1x wiping station brush pack (3x wiping station brushes)
Ѧ 1x .25 oz tube of Anti-Seize lubricant
Ѧ 1x stick of Elmer’s print head adhesive glue
Ѧ 1x brass brush