5
DESKTOP PRINTER QUICK START GUIDE
UNBOXING AND ASSEMBLY
WHAT’S IN THE BOX
Your Desktop Series printer ships with a number of accessories, listed below. With the exception of the last four
items, everything on the list below can be found in the accessory kit shipped inside your printer.
Note: To make full use of your Desktop Series printer, you will need these additional items: wire
cutters; masking tape, painter’s tape, or similar; a scale accurate to 1 gram.
● Drybox adapter plug
● 2mm hex key
● 2.5mm hex key
● 3mm hex key
● Plastic shim (in envelope)
● Fiber shim (in envelope)
●
●
● Fiber nozzle torque bit (10mm)
● Plastic nozzle torque bit (7mm)
● Torque wrench
● Plastic feed tube
●
● Tweezers
● Glue stick (applied to print bed before each print)
●
● 3 plastic nozzles
●
● Scraper
● TrueBed
●
●
● 50cc Kevlar (for Mark Two only)
●
● Drybox — shipped separately
●
● Spindle and spindle cap — in drybox
● Power cord — on top of printer
To Next Page
Loading...
