Página nº 13 de 25
For the system to work, a tag or identifier must be fixed to the 2-cup
filter-holder: the grinder distinguishes between a filter-holder with this
tag (and provides the dose for two cups of coffee) and filter-holder
without tag (for which it provides the dose for one cups of coffee), with
no need for any action on the part of the operator. (See Appendix I).
- Key selection, 1 Cup: When the filter-holder is
inserted, it receives the dose for 1 cup of
coffee. To obtain a dose for 2 cups of coffee,
press the 2c button before inserting the filter-holder.
- Key selection, 2 Cups: Without pressing any
button the filter-holder receives the dose for 2
cups of coffee. Press the 1c button before
inserting the filter-holder for the single dose.
- Key selection, last service. Without pressing any key the filter-holder
receives the same dose as in the last service.
- Dose selection by pressing filter-holder single or
double click:
o Press filter-holder once (single click): One
cup of coffee.
o Press filter-holder, release and press again (double click): Two cups
of coffee.
To Next Page
Loading...