Página nº 7 de 25
4.- Safety devices.
The grinder motor is protected by a thermal safety device that cuts off the
electricity to the motor if it becomes overheated. This device is
automatically reset when the machine cools.
The user cannot perform any operation on this device. If the device is
repeatedly activated, please consult our Technical Assistance Service, as
the motor may be damaged.
5.- Installation and set up.
Each grinder is factory tested with coffee beans to make sure that it works
properly. For this reason, you may find ground coffee in the grinder's
mechanisms.
5.1.- Grinder location.
Place the grinder on a solid, dry surface next to the coffee machine.
Never operate the grinder in wet or damp places.
5.2.- Installation and set up.
To put the hopper in place first loose
the fixing screw (T).
To Next Page
Loading...