7060330
Mini-awning
markilux 740
with angled guide rails
Mounting instructions
1
17/08/09
This manual is aimed at skilled fitters resp.
electricians. It describes how this awning is fixed
and put into operation.
Read these instructions carefully before starting the
mounting process of the awning and observe our
general Safety information of markilux window
awnings.
Before installation, the consignment has to be
checked for completeness and eventual transport
damages!
The adherence to the sequence of the installation
resp. setting instructions described in this manual
is absolutely essential.
The mini-awning as single unit consists of the fol-
lowing parts:
• completely pre-mounted cassette in protective
foil with downpipe
• 1 pair angled guide tracks including slide
mechanism with gas struts
• 1 guide tube
• winding handle with adapter cone
If ordered:
• Pivot bearing for interior operation with drive pin
50 cm and drilling template, foldable winding
handle
• electric drive, no winding handle
• Spacers for niche mounting for outside drive
1. Anchorages
Dimension sheet
xxx = even drill hole distribu-
tion
LF = length of guide track
ABO = number of drill holes [...] = dimensions with motor-
ised version and interior op-
eration
BA = mounting axis TB = fabric width
M = awning width AL = arm length
AH = unit height
To Next Page
Loading...
