marklin 81705 - Operations with the Transformer

8
3. Operations with the Transformer
Modelrailroadwithonetransformer:Plugthepowercord
intoawalloutlet.
Thelocomotive‘sspeedischangedbyturningthespeed
controlknobontheTransformer.
Turntotheright–thelocomotiverunsright
Turntotheleft–thelocomotiverunsleft
Turntothe“0”setting–thelocomotivestops.
Important:Themodelrailroadlightsorsolenoidaccessories
connectedtothetransformermustberatedfor10voltsAC
A light or solenoid accessory must never be connected to
two different transformers at the same time.
If two solenoid accessories are connected to the same
circuit track or control box, then both solenoid accessories
must be powered from the same transformer.
yellow
grey