◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
4. RS485：Reader provide RS485 communication interface（10、11 pin），
work as data main output mode，also can connect with PC via serial port，
use RS232-RS485 converter，in this way，RS485 interface support RS232
all supported functions;
5. Programmable output interface ： Two sets TTL electrical level
programmable output interface（1、2 pin）， works as Wiegand output
interface，default is high level（5V）； one set relay interface（13、14、15
pin）， relay default status is OFF and COM short circuit
6. Input check port：2 team input check port（7、8 pin），can configure as trigger
read mode，default as Dangling status is high level（5V）；
7. Power supply port：DC+9V～+15V==4A power port；
8. Antenna port：4 sets TNC antenna port；
9. Indicator light：6 indicator light，including COM port indicator light、power
indicator light and 4 sets antenna indicator light；
To Next Page