◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
4 Quick Start Guide
1、 Connect antenna to reader‟s antenna port（one antenna or multi-antenna
applicable, maximum 4 antennas）， connect power adapter to reader and
then power on，connect reader to LAN or PC by network cable；
2、 In PC open demo software“MR6100 Demo V1.0”，fill in reader IP address
and click“Connect”to connect reader（reader factory default IP address:
192.168.1.200）；
3、 After reader connection, it will automatically detecting antenna and
transmit power query，in“Setting”page selecting detected antenna port
（green icon）and click“Set”button，set corresponding port‟s transmit
power and click“Set”button，see below：
4、 In“Gen2 EPC MultiTag” page，click bottom right corner“Identify”button will
start EPC tag query operation，see below：
To Next Page