◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
1）User can configure IP address、RF power、frequency、antenna port、applied
mode、read card indicating etc.,
2）Each antenna port RF power can be configurable, range: 0-31dBm；
3）Frequency standard: China Frequency、US Frequency、EU Frequency
three type standard hopping frequency selectable；
4）Applied mode:“Favor speed” and“Favor quantity” two mode
selectable“Favor speed” for single tag or small batch tags quick speed read
mode；
“Favor quantity”for big batch tags read mode；
2、Operating mode configuration
1）In operating mode configuration, user can configure reader to be timming
working mode or pin trigger working mode，timer‟s timing interval can be
To Next Page