◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
2、EPC Gen2 Tag Lock level are unlock, unlock forever, and secure lock, lock
forever
1）Unlock means the tag is not to encrypted the tag
2）Unlock forever means the tag will not be locked forever
3）On Secure Lock, RESERVE Membank only can be read and write with
Access Password, EPC Memban and USER Membank can be encoded
with Access Password.
4）Lock forever, if the tag is set to lock forever, it can‟t be unlock again.
6.1.5 EPC Gen2 Tag Read and write with Access Password
1、n Gen2 EPC Single Tag interface‟s Gen2 Secured Read and Gen2 Secured
Write menu for the EPC tag reader and write with Access password. Take
below image for the reference.
1）Gen2 Secured Read with Access password
2）Gen2 Secured Write with Access password.
2、EPC Gen2 Secured Read with Access password need to input the Select
Read tag‟s Word Addr, and the WordCnt.
3、EPC Gen2 Secured Write with Access password need to input the Select
To Next Page
Loading...