◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
6.2.3 Single tag data reading and read with UID
1、In the ISO 6B operation interface，choose Single Tag to enter into single
tag operation interface，choose the start address of data you want to read in
the ISO Read menu item，click“Read”button to start reading data，the
interface will indicate the tags data that is read，the data length is 8 bytes data
from start address：
2、When data read with UID，it needs to know the UID of the tag first，you can
set the start address to 0 when query UID，the reading data is tag UID，after
inputting UID，choose the start address of reading data，click“Read With
UID”button to operate data reading：
To Next Page
Loading...