2
Quick Start Guide 5
Installation 6
Connecting the Solar iBoost 7
Assembling the Sender and Measurement Clamp 10
Fitting the Measurement Clamp 11
Testing 12
User Operation 13
Trouble Shooting 18
Further Support 19
Important Notice About Legionella 19
Warranty 19
Solar iBoost+ Controller:
Operating Voltage: 220-240 Vac
Control type: 1B
Maximum Permissible Loads: 13A Resistive (max 3kW immersion)
Rated Impulse Voltage Withstand 4kV
Insulation Properties Pollution Degree 2 in accordance with IEC 664
Operating Ambient Temperature Range: 0 to 40°C
Approvals: EN 60730-2-7, EN 301 489-3, EN 300 220
Dimensions: 225 x 158 x 92 mm
Solar iBoost+ Sender:
Battery Type: 2 x AA IEC LR6 1.5V alkaline (supplied)
Battery Life Cycle: 1 year (user replaceable)
Operating Radio Frequency 868.3 MHz
Radio Range 1 to 30m indoors
(dependant on construction and local conditions)
Operating Ambient Temperature Range: -5 to 40°C
Approvals: EN 60950, EN 301 489-3, EN 300 220
Dimensions: 95 x 75 x 35 mm (excluding clamp)
Contents
Technical Specifications
To Next Page
Loading...
