Need help?Do you have a question about the Marlec Solar iBoost+ and is the answer not in the manual?
Initial checks and preparation before installing the Solar iBoost+ unit.
Steps for wiring the Solar iBoost+ unit and connecting the measurement clamp.
Procedures to test and verify the correct operation of the installed system.
Visual guides for connecting the Solar iBoost+ for single and dual immersion heaters.
Verifies energy diversion stops when PV system is off.
How to program timed heating periods for different seasons.
Power| operating voltage | 220-240 Vac |
|---|---|
| maximum permissible loads | 3 kW (13A Resistive) |
| rated impulse voltage withstand | 4 kV |
Operating Environment| operating ambient temperature range | 0 to 40°C |
|---|---|
| insulation properties pollution degree | 2 |
Weight and Dimensions| weight | 1.36 kg |
|---|---|
| dimensions | 225 x 158 x 92 mm |
Power| battery type | 2 x AA IEC LR6 1.5V alkaline |
|---|---|
| battery life cycle | 1 year |
Operating Environment| operating ambient temperature range | -5 to 40°C |
|---|---|
| operating radio frequency | 868.3 MHz (United Kingdom/Europe) |
| radio range indoors | 1 to 30 m |
Weight and Dimensions| dimensions | 95 x 75 x 35 mm |
|---|
To Next Page
