MARLO MR-450-2 - User Manual

52 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

MR 150M–1050M

SINGLE – SYSTEM 4

MX-III CONTROLLER

COMMERCIAL WATER CONDITIONERS

INSTALLATION, OPERATION,

AND MAINTENANCE MANUAL

MODEL NO:

SERIAL NO:

DATE INSTALLED:

DEALER:

COMPLETE FOR FUTURE REFERENCE:

Marlo Incorporated

2227 South Street

P.O. Box 044170

Racine, WI 53404-7003

www.Marlo-Inc.com

A2170381 8-313 R3

FOR MODELS MANUFACTURED

FROM OCTOBER 2017

Table of Contents

Questions and Answers

K
Kevin RomeroAug 21, 2025
What to do if a communication error is detected on my MARLO Controller?
- K
  Karen KingAug 21, 2025
  A communication error with the MARLO Controller could be due to missing or faulty communication cables. Ensure all communication cables are properly connected and replace any that are damaged. Another cause may be that the communication cables are plugged into the wrong receptacle. Refer to the wiring diagrams to connect the cables correctly. Also, ensure all units are powered on, as a lack of power to one or more units can cause this error.
J
Jose OlsonSep 4, 2025
How to fix a format mismatch on my MARLO MR-450-2 Controller?
- S
  Stephanie OrtegaSep 4, 2025
  To resolve a format mismatch on your MARLO Controller where units have both U.S. and Metric formats, verify that all units have the same format selected, either all U.S. or all Metric.
L
leejessicaSep 2, 2025
How to correct display format mismatch errors on the MARLO MR-450-2 Controller?
- H
  Hayley McmillanSep 2, 2025
  To address programming errors related to display format mismatches on your MARLO Controller, program the units correctly in the Master Programming Mode.
J
Jose MooreSep 1, 2025
How to fix programming errors related to system size on my MARLO MR-450-2?
- S
  Susan CarlsonSep 1, 2025
  To resolve programming errors related to the size of the system on the MARLO Controller, program the units correctly in the Master Programming Mode.
D
David BrooksAug 30, 2025
What to do if my MARLO MR-450-2 Controller shows a size error due to incorrect unit numbering?
- C
  Cameron HatfieldAug 30, 2025
  To correct a size error on your MARLO Controller where units are not correctly numbered or multiple units have the same number, check each unit to verify it has the correct number and that no other unit shares that number.
T
timothy54Aug 29, 2025
How to resolve duplicate unit address errors on the MARLO MR-450-2?
- T
  Tyler JonesAug 29, 2025
  To resolve programming errors related to duplicate unit addresses or numbers on the MARLO Controller, program the units correctly in the Master Programming Mode.
J
Joshua GarciaAug 27, 2025
What does "Com Error" mean on my MARLO Controller and how to fix it?
- V
  Victoria RichardsonAug 27, 2025
  A "Com Error" on your MARLO Controller indicates a communication error. To resolve this, check the system's wiring to ensure it is correct and that all connections are secure.
H
henry29Aug 26, 2025
How to fix a MARLO Controller when no messages are displayed?
- P
  Patricia FrancoAug 27, 2025
  If your MARLO Controller displays no messages or shows small black squares, adjust the contrast button located on the back of the unit until the text becomes visible.
E
Eric TranAug 25, 2025
Why is the display on my MARLO Controller flashing?
- L
  loverandyAug 25, 2025
  If the MARLO Controller display is flashing or blinking, it indicates that a power outage has occurred.
M
Michael OlsonAug 23, 2025
Why is my MARLO MR-450-2 showing a matching address error?
- C
  Carrie HerreraAug 23, 2025
  The most likely cause of a matching address error in your MARLO Controller is having two or more units programmed with the same unit number. To resolve this, ensure that each unit has a unique unit number.

Summary

System Information

Wiring Diagrams

Electrical schematics for controller and component connections.

Tubing Diagrams

Hydraulic connection diagrams for system components.

Installation Procedures

General Installation Guidelines

Piping Installation

Instructions for connecting water, drain, and bypass lines.

Softener Loading

Procedures for filling the mineral tank with gravel and resin.

Brine Tank Installation

Operation and Control

Start-Up Instructions

Steps for initial system startup and basic configuration.

User Mode Programming Flow Chart

Programming Parameters and Ranges

Master Mode Programming Flow Chart

Diagnostic Mode Programming Flow Chart

Maintenance and Troubleshooting

MX-III Controller Replacement Parts

List of available replacement parts for the MX-III controller.

Replacement Valves

Aquamatic Valve Repair Kits

2536 Flow Sensor and Fittings

Error Codes

List of error messages, their causes, and correction procedures.

Troubleshooting

Guidance for diagnosing and resolving common system problems.

MARLO MR-450-2 Specifications

General

Brand	MARLO
Model	MR-450-2
Category	Controller
Language	English

Related product manuals

MARLO MR M Series