M6 - Mx computer System | V1 | Introduction and Presentation
Software Application Name Definition
Scala Replay Marport software application replaying data recorded in Scala.
Mosa Marport software application used to configure sensors. Can be
used on desktop or tablet computers.
Marport Tools Marport software application used to manage the receiver
firmware.
Mozilla Firefox (from version
22 to 51)
Web browser
Java (version 7 or lower) To correctly display system web page.
Filezilla File management tool.
TeamViewer To give remote access of your computer to support service
Technical Specifications
Receivers
Frequency range 33-57 kHz
Active bandwidth 24 kHz
Max. number of Rx/Tx channels 6
Max. number of hydrophones 6
Bearing to sensor measurement Yes
Distance to sensor measurement Yes
Number of simultaneous data reception 100
Number of high resolution sounders (NBTE,
HDTE)
10
Temperature input 4 NTC + 2 NMEA
Network cables CAT5e, 100 meters max., U/FTP shielding*
Important: *Make sure to respect these specifications if installing a new Ethernet network
cable.
Mx computer
Product reference PO boxer-6639M
Dimension (W x H x D) 264.2 mm x 186.2 mm x 96.4 mm (10.4” x 3.8” x 6.1”)
Weight 4.5 kg (8.8 lb)
Operating temperature Ambient with Airflow
-20°C ~ 50°C
| 10
To Next Page
Loading...
