EN
44
Reconnection of calls
Reconnection of voice from speaker to mobile
phone can be done when call is in progress.
Press and hold the button to reconnect
call from speaker to phone.
Bluetooth A2DP (audio streaming)
If a Bluetooth device that supports Advanced
Audio Distribution Prole (A2DP) is connected
to the product it can play music saved in the
device. If the connected device also supports
Audio Video Remote Control Prole (AVRCP)
the playback of music in the device can be
controlled from the product or its remote
control.
REMOTE CONTROL
1. Press SRC repeatedly to select [BT AUDIO].
2. Press to start playback. Press again to
pause playback.
3. Press to switch between tracks forwards
or back.
MAINTENANCE
• Clean the front panel on the product with
a soft brush or cloth. Other cleaning
methods risk damaging the product.
• Clean the connections on the main unit
and the front with a dry and clean cotton
cloth.
Preparations
The product and the Bluetooth devices to be
used must rst be paired. Pairing only needs to
be done once per device.
Pairing with Bluetooth device
1. Start the mobile phone and activate its
Bluetooth function.
2. Activate the mobile phone’s search for
other Bluetooth devices.
3. Mark MARQUANT102 in the pairing list.
4. [PAIRED] is shown on the display if the
pairing is successful. The paired unit then
connects automatically to the high-
system in the vehicle.
Calling (outgoing calls)
1. Make a call from the mobile phone.
2. [CALLING] is shown on the display when
the number is called or selected.
Callback
1. Press on the front panel to call the
last called number.
2. [CALLING] is shown on the display if the
product calls the last called number.
NOTE:
The Bluetooth connection between the
product and the phone used must be active.
Answering a call
1. The calling number is shown for an
incoming call. [PHONE IN] is shown if the
calling number is not available.
2. Press to answer the call.
3. After the end of the call, press to
disconnect.
To Previous Page
Loading...
