Marrison MD Series - Operation Panel

19
3. Operation Panel
3-1 LED Operation Panel
 FEED Button
When you press the FEED button, the printer moves the label to the defined stop position. If you are using
continuous labels, pressing the FEED button will move label stock until you release the button again. If you are
using individual labels, pressing the FEED button will move only one label. If the label does not stop at the correct
position, please run the auto calibration (See Section 3-2. for the label size calibration function) on the label stock.
 LED Indicators
LED indicator
Status
Description
Green
Standby mode
The printer is ready for operation
Red /Orange
Error mode
The printer has detected an error.
(See Section 3-2. for Error alerts)
LED Operation Panel
FEED Button
LED Indicator