Owner’s Manual - REG183-R01, REG243-R01
9
Before you get started.
NOTE
Installing your AC should take about
60 minutes.
The installation must be carried out
in strict accordance with the instructions
in this manual.
Manual
We recommend doing this with a helper.
We’re here if you need us, please contact
your local distributor for assistance.
Save Carton and these Installation
Instructions for future reference.
The carton is the best way to
store unit during winter, or when
not in use.
Preparations before installation
WINDOW REQUIREMENTS
W
H
Your air conditioner is designed to install in a wooden sill double-hung window. All wood parts of
window must be in good shape and able to firmly hold the needed screws. If not, make repairs before
installing unit. If your storm window frame does not allow the clearance required, correct by adding a
piece of wood,or by removing storm window while room air conditioner is being installed.
The standard parts are for window dimensions listed below.
Unit height Unit width
Min. window opening
Min. window width Max. window width
18-5/8in(473mm)
17-5/8in(447mm)
23-5/8in(600mm)
18-1/2in(470mm)
26-1/2in(673mm) 19-1/2in(495mm)
40-1/2in(1029mm)28in(711mm)
31in(787mm) 42in(1067mm)
CAUTION
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Do not change the plug on the power cord of the air conditioner. Aluminum house wiring may
present special problems- consult a qualified electircian.When handling unit, be careful to avoid
cuts from sharp metal edges and aluminum fins on front and rear coils.
The rear of the unit must be outdoors, not inside a building or garage.
To Next Page
Loading...
Need help?
General
