CV620-TBI/TWI User Manual
www.marshall-usa.com26 27
1. Select [Stage] for Tracking Mode, and click
box to select an area (orange box)
2. After the selection, click
to set, and the preview screen will display the selected area, then click
to access the settings
3. Set the Left/Right Border
Left Border: Click
to move the position and click when finished
Right Border: Click
to move the position and click when finished
Click
to complete the settings after setting the left/right border
4. Click
to enable the Stage feature
1. Select [Partition] for Tracking Mode, and click
to access the settings
2. Use PTZ function to adjust to the screen to be partitioned, and then click
to save. The partition icon
below will be changed to the saved position
3. If you need to set other partitions, please continue using PTZ function to adjust the screen, and then
click
to save
<Remark> If a red box is displayed when adjusting the screen, it means that the position overlaps with that of other
partitions. Please adjust the screen again and save it when a green box is displayed
<Remark> Overlapping partition positions may cause abnormal tracking behavior
4. Click to enable the Partition feature
5.2.3.1 Stage 5.2.3.2 Partition
1. Select [Partition] for Tracking Mode, and click to access the settings
2. Use PTZ function to adjust to the screen to be partitioned, and then click to save. The partition icon
below will be changed to the saved position
3. If you need to set other partitions, please continue using PTZ function to adjust the screen, and then
click to save
<Remark> If a red box is displayed when adjusting the screen, it means that the position overlaps with that of other
partitions. Please adjust the screen again and save it when a green box is displayed
<Remark> Overlapping partition positions may cause abnormal tracking behavior
4. Click
to enable the Partition feature
To Next Page
Loading...
