INTRODUCTION
The Supervibe takes the world renowned Marshall chorus
as found in the Acoustic Soloist and Valvestate models and
tailors it to pedal form - but that isn’t where it ends. By
including the innovative wave control a full range of vintage
and contemporary effects are available.
By modulating a slightly delayed signal against the direct
sound a slight pitch shifting occurs which creates a rich
chorus effect.
The Supervibe features a passive bypass for the main
signal path to ensure complete tonal integrity and has a
quality of tone matched only by its versatility.
Here follows a complete run down of the Supervibe’s
features for your information. We have also enclosed a
number of suggested settings to help guide you. It should
be remembered that these are only suggested settings and
you should really experiment as much as possible.
Though the Marshall Supervibe can produce traditional
type effects it is also ideally suited to the player who wants
something a little bit different. So take the time to explore
the sonic avenues opened to you by the Supervibe, you won’t
be disappointed.
ENGLISH
3
2
WARNING!
Important safety instructions!
A. PLEASE read this instruction manual carefully before use.
B. ALWAYS have this equipment serviced or repaired by
competent qualified personnel. There are no user serviceabe
parts.
C. Servicing is required when the apparatus has been
damaged in any way, if it does not operate normally or has
been dropped.
D. NEVER use a pedal in damp or wet conditions.
➲ Note: This equipment has been tested and found to
comply with the requirements of the EMC directive
(Environments E1, E2 and E3).
➲ Note: It is recommended that all audio cables used to
connect to the pedal are of a high quality screened type.
These should not exceed 10 metres in length.
Follow all instructions and
heed all warnings
KEEP THESE INSTRUCTIONS !
To Next Page
Loading...
