BATTERY REPLACEMENT
1. To replace the battery, open the easily accessed coin
screw battery cover plate by loosening screw as shown,
then disconnect the
battery connector lead.
2. Use PP3 or
equivalent battery (for
improved battery life use
alkaline type)
3. Always ensure that
the battery is removed
when the pedal is not in use for long periods.
4. Dispose of old battery in a safe place.
ENGLISH
7
6
WHAT IF
NO
OUTPUT
SOUND TOO
TREBLY OR
FIZZY
UNUSUAL
HUM
BASS
FEEDBACK
SOUND TOO
MUSHY OR
BASSY
UNUSUAL
FEEDBACK
INDICATOR
LED NOT
ON
NOISE IN
BYPASS
CHECK
BATTERY
CHECK
LEADS
CHECK PEDAL
CONTROLS
DC INLET
CHECK AMP
CONTROLS
CHECK GUITAR
✓✓✓✓✓
✓
✓✓ ✓
✓✓
✓✓
✓✓ ✓✓
✓✓✓✓
✓
REDUCE
TREBLE
REDUCE
TREBLE
INPUT
LEAD
MOVE
AWAY
FROM AMP
PICKUPS
MAY BE
VIBRATING
TROUBLE SHOOTING
TECHNICAL SPECIFICATION
Power : 9V DC Centre Negative Regulated
Current Draw : 19mA
Controls : Speed, Depth, Wave and
Filter control
Switches : On/Off Switch
Indicators : On/Off LED
Jacks : 1 Input, 2 Output ‘Jacksockets’
Input Impedance : 1MΩ
Output Load Impedance : < 1kΩ
Dimensions : 120mm x 65mm x 55mm
Weight : 510 grammes
To Previous Page
Loading...
