Marshall Amplification JVM 2 Series User Manual

2-channel JVM amps boast 3 gain modes giving
you a total of 6 different sounds to choose
from.
The front panel contains dedicated EQ and
gain controls for both the 2 channels, master
and reverb sections. The master section is
comprised of 2 footswitchable master volumes,
plus master resonance and presence controls
that work on both channels. The reverb section
consists of reverb level controls for each
channel.
JVM205H
VALVES
4 x ECC83, 1 x ECC83 (phase splitter) and 2 x
EL34
CHANNELS
2 (multi): Clean/Crunch and OD
POWER
50W
EQUALISATION
Treble, middle, bass, presence and resonance
EFFECTS
Digital reverb
OUTPUTS
5 x 1/4” jack speaker outputs, selectable 16Ω/
8Ω / 4Ω load
Emulated line out (XLR)
MIDI thru
EFFECTS LOOPS
2, 1 x series parallel, 1 x series
JVM210H
VALVES
4 x ECC83, 1 x ECC83 (phase splitter) and 4 x
EL34
CHANNELS
2 (multi): Clean/Crunch and OD
POWER
100W
EQUALISATION
Treble, middle, bass, presence and resonance
EFFECTS
Digital reverb
OUTPUTS
5 x 1/4” jack speaker outputs, selectable 16Ω/
8Ω / 4Ω load
Emulated line out (XLR)
MIDI thru
EFFECTS LOOPS
2, 1 x series parallel, 1 x series
ENGLISH
2.0
OVERVIEW AND SPECIFICATION

Marshall Amplification JVM 2 Series Specifications

General

Brand	Marshall Amplification
Model	JVM 2 Series
Category	Recording Equipment
Language	English