NOT POWERING ON
NOT CHARGING
NOT PAIRING
NO SOUND
POOR SOUND QUALITY
NOT RESPONSIVE
CHARGE THE HEADPHONE USING THE USB CABLE.
MAKE SURE THE USB POWER SOURCE IS SWITCHED ON.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE OR
OBSTRUCTION.
MAKE SURE THE HEADPHONE IS NOT CONNECTED TO A DIFFERENT SOUND SOURCE WHEN
ENTERING THE PAIRING MODE.
DISABLE AND ENABLE BLUETOOTH® COMMUNICATION ON YOUR SOUND SOURCE.
MAKE SURE THE HEADPHONE IS ON AND CONNECTED.
MAKE SURE THE SOUND SOURCE IS PLAYING.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE
OR OBSTRUCTION.
LOCATE RESET BUTTON INSIDE THE 3.5MM INPUT AND PRESS FOR AT LEAST TWO SECONDS
USING A PAPERCLIP OR SIMILAR NARROW OBJECT.
PROBLEM ACTION
MARSHALL IS A TRADEMARK OF MARSHALL AMPLIFICATION PLC. PERMISSION GRANTED. DESIGN OF PRODUCT AND PACKAGING ARE INTELLECTUAL PROPERTIES OF ZOUND INDUSTRIES INTERNATIONAL AB. © 2016 ZOUND INDUSTRIES. ALL RIGHTS
RESERVED. PRODUCED IN CHINA. THE MANUFACTURER OF THIS PRODUCT MAKES NO CLAIMS OF COMPATIBILITY OF THE MICROPHONE AND REMOTE WITH ANY MOBILE DEVICE. FOR USE WITH CELLPHONE USING 3.5 MM PLUG UNPROTECTED TWO-WAY
STANDARD. ZOUND INDUSTRIESINTERNATIONAL AB • CENTRALPLAN 15 • 111 20 STOCKHOLM • SWEDEN
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY ZOUND INDUSTRIES INTERNATIONAL AB IS UNDER LICENSE.
.USB
. USB
.
.
.
.
.
.
. 3.5
To Next Page
Loading...
Need help?
General
