Need help?Do you have a question about the Marshall Amplification MOTIF II A.N.C. and is the answer not in the manual?
General| Type | Over-ear |
|---|---|
| Active Noise Cancellation | Yes |
| Battery Life (ANC on) | 30 hours |
| Battery Life (ANC off) | 45 hours |
| Driver Size | 40 mm |
| Driver Type | Dynamic |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Charging Time | 2 hours |
| Water Resistance | No |
| Microphone | Yes |
| Colors | Black |
| Bluetooth Range | 10 meters |
LED indicator on the charging case shows battery status and Bluetooth pairing mode.
Button to check case battery level and initiate Bluetooth pairing.
Charge the case by placing it on a wireless charging pad.
Charge the case by plugging it into a USB power source.
Control music, calls, and features via touch-sensitive earbud surfaces.
Comes with 3 sizes of ear tips for optimal fit and audio experience.
Steps for initial setup: opening case, pairing, Bluetooth connection, and app setup.
Place earbuds in the case and close lid to turn off and begin charging.
Charge the case via USB or wireless pad; steady green LED indicates full charge.
Modes: Active Noise Cancelling, Transparency, and Off for managing ambient sound.
Double tap and hold earbud to play Spotify music recommendations.
Guidelines for battery health: avoid fast charging, extreme temps, and full discharge.
Instructions for cleaning earbuds and case using appropriate materials for performance.
Pair with up to 8 devices; auto-connects to the two most recent available devices.
Instructions for restart, hardware reset, and factory reset for erratic earbuds.
Download app for firmware updates, battery preservation levels, and customization.
Action for earbuds not turning on: ensure charging and check case charging status.
Solutions for connection issues: enable Bluetooth, ensure pairing mode, check device list.
Resolve erratic behavior by updating firmware or performing a factory reset.
To Next Page
