Need help?Do you have a question about the Marshall Amplification MGP 9060 and is the answer not in the manual?
General| Technology | Solid State |
|---|---|
| Channels | 2 |
| Type | Guitar Amplifier |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| EQ | 3-Band |
| Effects | Reverb |
Basic general settings for clean, crunch rhythm, and lead overdrive sounds.
Recommended settings for the clean channel with optional EQ.
Recommended settings for the crunch rhythm channel with optional EQ.
Recommended settings for the bright lead channel with optional EQ.
Recommended settings for the fat lead channel with optional EQ.
Ensure correct mains plug fitting, wiring, and earthing for safe operation.
Never bypass fuses or replace them with incorrect values while connected to mains.
Do not remove the chassis; there are no user serviceable parts. Refer servicing to qualified personnel.
Never use the equipment in damp or wet conditions.
Switch on the 9005 only with loudspeakers connected and impedance matched.
Do not obstruct the airflow around the heatsinks of the Model 9040.
Please read this instruction manual carefully before switching on.
To Next Page