Need help?Do you have a question about the Marshall Amplification MINI JUBILEE 2525C and is the answer not in the manual?
Details regarding power input voltage, fuses, and proper connection.
Instructions for safely unplugging and transporting the amplifier.
Step-by-step guide for initial setup and operation.
Connect guitar, adjust input sensitivity, and control clean/crunch levels.
Manage lead channel activation and output levels.
Adjust Treble, Middle, Bass, and Presence for desired tone.
Configure output power (20W/5W), Standby, and main power switch.
Connect mains power and details on HT fuse replacement.
Connect external effects and the channel footswitch.
Send signals to mixers/amps and connect speaker cabinets safely.
Details regarding power input voltage, fuses, and proper connection.
Instructions for safely unplugging and transporting the amplifier.
Step-by-step guide for initial setup and operation.
Connect guitar, adjust input sensitivity, and control clean/crunch levels.
Manage lead channel activation and output levels.
Adjust Treble, Middle, Bass, and Presence for desired tone.
Configure output power (20W/5W), Standby, and main power switch.
Connect mains power and details on HT fuse replacement.
Connect external effects and the channel footswitch.
Send signals to mixers/amps and connect speaker cabinets safely.
General| Wattage | 20W |
|---|---|
| Number of Channels | 2 |
| Preamp Tubes | 3 x ECC83 |
| Power Tubes | 2 x EL34 |
| Reverb | No |
| Effects Loop | Yes |
| Type | Tube |
| Speaker | 1 x 12" Celestion G12M-25 |
| EQ | Treble, Middle, Bass |
| Controls | Gain, Volume, Treble, Middle, Bass, Presence |
| Footswitch | Yes, for channel switching |
To Next Page