Need help?Do you have a question about the Marshall Amplification STUDIO JTM ST20H and is the answer not in the manual?
General| Power | 20 Watts |
|---|---|
| Power Tubes | 2 x EL34 |
| EQ | Bass, Middle, Treble |
| Inputs | 1 x 1/4" |
| Speaker Outputs | 1 x 16 Ohm, 1 x 8 Ohm |
| Effects Loop | Yes |
| Type | Tube |
| Footswitch I/O | 1 x 1/4" |
| Preamp Tubes | 3 x ECC83/12AX7 |
Essential warnings regarding mains compatibility, fuse usage, and safe equipment handling.
Step-by-step guide for connecting, powering on, and configuring the amplifier for use.
Details on the power switch, standby switch, and power indicator light for amp operation.
Explanation of Bass, Middle, Treble, Presence, and Loudness controls for tone shaping.
Information on high treble and normal inputs for different gain and tone characteristics.
Details on 1/4" speaker outputs for various impedance loads and cabinet configurations.
Information on connecting external effects, sending/returning signals, and using the DI output.
Location of the mains power inlet and important safety warnings regarding speaker loads.
To Next Page