EasyManua.ls Logo

Marshall Amplification STUDIO JTM ST20C - User Manual

Marshall Amplification STUDIO JTM ST20C
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STUDIO JTM
ST20H & ST20C
QUICK START GUIDE
Question and Answer IconNeed help?

Do you have a question about the Marshall Amplification STUDIO JTM ST20C and is the answer not in the manual?

Marshall Amplification STUDIO JTM ST20C Specifications

General IconGeneral
Preamp Tubes3 x ECC83
Power Tubes2 x EL34
ReverbNo
EffectsNo
Power20 Watts
Speaker1x12"
ControlsBass, Middle, Treble, Presence
TypeTube Combo

Summary

Safety Instructions

Mains Input and Fuse

Specifies mains input voltage rating and fuse details for safe operation.

Important Set Up Information

Guides on connecting speaker cabinets, setting switches, and connecting power for initial use.

Front Panel Functions

Power Switch

Controls the mains power supply to the amplifier, turning it on or off.

Standby Switch

Selects between 5W, standby, and 20W power modes for the amplifier.

Presence Control

Adjusts high frequencies of the power amp for added bite.

Bass Control

Adjusts low frequencies, adding bottom end and depth to the sound.

Middle Control

Adjusts mid frequencies, shaping tone from fat to aggressive.

Rear Panel Functions

Related product manuals