Need help?Do you have a question about the Marshall Amplification STUDIO CLASSIC SC20C and is the answer not in the manual?
General| Power | 20W |
|---|---|
| Preamp Tubes | 3 x ECC83 |
| Power Tubes | 2 x EL84 |
| Type | Tube Amplifier |
| Channels | 2 |
| EQ | Bass, Middle, Treble |
| Controls | Presence, Bass, Middle, Treble |
| Inputs | 1 x Instrument |
| Outputs | 1 x Speaker Output |
| Effects Loop | Yes |
| Footswitch | Optional |
Information on mains voltage rating, power lead connection, and correct fuse value.
Step-by-step guide for connecting speakers, setting switches, and initial power-up.
Guidelines for safely moving the amplifier by ensuring it is powered off and unplugged.
Details the inspiration from JCM800 2203 and its portable format benefits.
Lists valves, channels, power control, equalization, speakers, speaker outputs, and DI output.
Visual guide to the controls on the SC20H and SC20C front panels.
Explains the power switch, standby switch, and power modes (20W/5W).
Details the functions of Presence, Bass, Middle, and Treble for tone adjustment.
Describes Master Volume, Preamp Volume, High Input, and Low Input sockets.
Visual guide to the rear panel connectors and ports on the SC20H and SC20C models.
Details the 1/4" sockets for connecting speakers with various impedance loads.
Explains the effects loop SEND/RETURN/SWITCH and the DI output with emulation.
Specifies the connection point for the mains power lead.
To Next Page
