Need help?Do you have a question about the Marshall Amplification STUDIO VINTAGE SV20C and is the answer not in the manual?
General| Power | 20 Watts |
|---|---|
| Preamp Tubes | 3 x ECC83 |
| Power Tubes | 2 x EL34 |
| Footswitch | No |
| Type | Tube Amplifier |
| Controls | Bass, Middle, Treble, Presence |
| Effects Loop | Yes |
Details about mains input and fuse, including voltage compatibility and correct fuse type.
Step-by-step guide for initial setup, including speaker connection and control settings.
Essential safety precautions to follow before moving the amplifier to prevent damage.
Lists the vacuum tubes used in the amplifier for tone generation and performance.
Details the amplifier's channel configuration, including input sensitivity and loudness controls.
Information on the selectable power output modes (20W/5W) for different playing environments.
Specifies the type and size of the speaker included in the combo version of the amplifier.
Outlines the tone-shaping controls available, such as treble, bass, middle, and presence.
Details the available speaker output jack configurations and impedance options.
Lists the various output connections available on the amplifier, including DI output.
Explains the main power switch and the power status indicator light.
Describes the standby switch function for low-power mode and performance breaks.
Covers Presence, Bass, Middle, and Treble controls for shaping the amplifier's tone.
Details the volume controls for different inputs, affecting overall loudness.
Explains the various input jacks for connecting instruments, including sensitivity and tone type.
Details the various speaker output jack configurations and impedance options for connecting cabinets.
Provides a direct output for connecting to recording devices or sound desks with emulation.
Covers the loop switch, send, and return connections for external effects units.
Indicates the connection point for the supplied mains power lead.
To Next Page
