Marshall Amplification ORIGIN 5 COMBO - Rear Panel Functions; Mains Power Inlet; 16 Ohm Speaker Output; Effects Loop Return Jack

1. MAINS INLET
Connect your amplier to the supplied
mains lead using this socket.
2. 16 OHM OUTPUT
Your Celestion Eight-15 speaker is
connected here.
Note: always ensure before connecting
and disconnecting speaker loads from
your Origin that it is switched off rst.
3. EFFECTS LOOP RETURN
Return your signal from your effects or
outboard processor here.
4. EFFECTS LOOP SEND
Send your signal to your effects or
outboard processor from this socket.
5. FOOT SWITCH
Connect a 2-way foot switch
(PEDL-90016) to this socket to control
the gain boost function and turn the effects
loop on and off.
4.0
REAR PANEL FUNCTIONS
ENGLISH
2
345 1